New Releases of DENNCO project - a neural computing engine

dennco - Linux - alpha 2.0.1

tkawata (tkawata) — Sun, 30 Dec 2012 01:27:00 GMT

ReleaseNote

dennco project

Alpha 2.0.1 release for linux
Date: Jan 9, 2013

- How to run:

1. Execute StartEngine.sh. It will launch the "dennco engine" application.
2. Press [Choose Dir] button and choose the directory contains the dennco
application content.
3. Press [Start] button. The application will be loaded into the engine and
start runnig.

- A sample containers are provided.
They are under Samples/Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample4_Arduino2_PIDControl
- demonstrate the serial communication functionality.
This demo controls a motor. Arudino + Motor shield is used.
This demo read analog3 input from Arduino and control motor
with PID controller.

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

Dennco Creator - Linux - alpha 2.0.1

tkawata (tkawata) — Sun, 30 Dec 2012 01:25:00 GMT

ReleaseNote

dennco project

DenncoCreator - alpha 2.0.1 release for linux
Date: Jan 9, 2013

- How to run:

1. Execute StartDenncoCreator.sh. It will launch the "dennco creator" application.
2. - Select File -> Open... from menu and choose the directory contains the dennco application content to edit.
- Select File -> New for create new dennco application content.

- A sample containers are provided.
They are under Samples/Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

Dennco Creator - Mac OSX - alpha 2.0

tkawata (tkawata) — Sat, 29 Dec 2012 16:06:00 GMT

ReleaseNote

dennco project

DenncoCreator - alpha 2.0 release for Mac
Date: Dec 30, 2012

- How to run:

1. Execute "denncoCreator.app". It will launch the "dennco creator" application.
(Though there is another application "QtDennco.app" on the same directory.
You don't need to execute it. DenncoCreator will launch it when required.)

2. - Select File -> Open... from menu and choose the directory contains the dennco application content to edit.
- Select File -> New for create new dennco application content.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

dennco - Mac OSX - alpha 2.0

tkawata (tkawata) — Sat, 29 Dec 2012 16:00:00 GMT

ReleaseNote

dennco project

Alpha 2.0 release for mac
Date: Dec 30, 2012

- How to run:

1. Execute QtDennco.app. It will launch the "dennco engine" application.
2. Press [Choose Dir] button and choose the directory contains the dennco
application content.
3. Press [Start] button. The application will be loaded into the engine and
start runnig.

- A sample containers are provided.
They are under Samples/Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample4_Arduino2_PIDControl
- demonstrate the serial communication functionality.
This demo controls a motor. Arudino + Motor shield is used.
This demo read analog3 input from Arduino and control motor
with PID controller.

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

Dennco Creator - Windows - alpha 2.0.1

tkawata (tkawata) — Sat, 29 Dec 2012 14:46:00 GMT

ReleaseNote

dennco project

DenncoCreator - alpha 2.0 release for windows
Date: Dec 29, 2012

- How to run:

1. Execute StartDenncoCreator.bat. It will launch the "dennco creator" application.
2. - Select File -> Open... from menu and choose the directory contains the dennco application content to edit.
- Select File -> New for create new dennco application content.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

dennco - Windows - alpha 2.0.1

tkawata (tkawata) — Sat, 29 Dec 2012 14:44:00 GMT

ReleaseNote

dennco project

alpha 2.0 release for windows
Date: Dec 29, 2012

- 使い方:
1. StartEngine.batを起動します。"dennco engine" アプリケーションが起動します。
2. [Choose Dir] ボタンを押して実行するコンテンツを選択します。
3. [Start] ボタンを押して実行を開始します。

- サンプルのコンテンツが提供されています。
サンプルは Samples\Samples ディレクトリ配下にあります。
　次のサンプルが提供されています。

Sample1_SampleCells
- cell の基本的な機能を使ったサンプル

Sample2_SimpleStorageCells
- 保存機能を用いたサンプル

Sample3_Arduino1
- シリアル通信機能を使ったサンプル
通信相手として Arduino Uno を想定
analog0 の読み込みと PWD3 からのアナログ出力をコントロール
Arduino Uno で動作させるスケッチを Arduino/sketch1 に提供

Sample4_Arduino2_PIDControl
- シリアル通信で Arduino Uno と接続し、モータを制御するデモ
モータの制御はモータシールドを介して行うことを想定しています。
Aruduino の analog3 からの値を読み取り、これをもとに PID 制御を行います。

Sample5_SimplePerceptron
- パーセプトロン・ニューラスネットワークの dennco による実装例です。
理論は http://en.wikipedia.org/wiki/Perceptron を参考にしました。

Dennco Creator - Linux - alpha 1.0

tkawata (tkawata) — Sun, 11 Nov 2012 09:32:00 GMT

ReleaseNote

dennco project

AenncoCreator - alpha 1.0 release for linux

Date: Nov 11, 2012

- How to run:

1. Execute StartDenncoCreator.sh. It will launch the "dennco creator" application.

2. - Select File -> Open... from menu and choose the directory contains the dennco application content to edit.

- Select File -> New for create new dennco application content.

- A sample containers are provided.

They are under Samples/Samples. Following samples are provided:

Sample1_SampleCells

- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells

- demonstrate the persistent storage functionality.

Sample3_Arduino1

- demonstrate the serial communication functionality.

Arduino uno is expected to be used as the device communicate to.

A sketch for arduino is provided under Arduino/sketch1

Sample5_SimplePerceptron

- A example to implement Perceptron neural network using dennco.

To implement the logic. Following URL is referenced.

http://en.wikipedia.org/wiki/Perceptron

Dennco Creator - Windows - alpha 1.0

tkawata (tkawata) — Sun, 04 Nov 2012 10:40:00 GMT

ReleaseNote

dennco project

AenncoCreator - alpha 1.0 release for windows
Date: Nov 8, 2012

- How to run:

1. Execute StartDenncoCreator.bat. It will launch the "dennco creator" application.
2.
- Select File -> Open... from menu and choose the directory contains the dennco application content to edit.
- Select File -> New for creating new dennco application content.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

dennco - Mac OSX - alpha 1.0.1

tkawata (tkawata) — Sat, 02 Jun 2012 09:58:00 GMT

ReleaseNote

dennco project

Alpha 1.0.1 release for mac
Date: June 2, 2012

- How to run:

1. Execute QtDennco.app. It will launch the "dennco engine" application.
2. Press [Choose Dir] button and choose the directory contains the dennco
application content.
3. Press [Start] button. The application will be loaded into the engine and
start runnig.

- A sample containers are provided.
They are under Samples/Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample4_Arduino2_PIDControl
- demonstrate the serial communication functionality.
This demo controls a motor. Arudino + Motor shield is used.
This demo read analog3 input from Arduino and control motor
with PID controller.

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

ChangeLog

Fixed the issue reported in ticket 28621.
The packaging was not correct.

dennco - Mac OSX - alpha 1.0

tkawata (tkawata) — Sat, 02 Jun 2012 01:19:00 GMT

ReleaseNote

dennco project

Alpha 1.0 release for mac
Date: June 1, 2012

- How to run:

1. Execute QtDennco.app. It will launch the "dennco engine" application.
2. Press [Choose Dir] button and choose the directory contains the dennco
application content.
3. Press [Start] button. The application will be loaded into the engine and
start runnig.

- A sample containers are provided.
They are under Samples/Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample4_Arduino2_PIDControl
- demonstrate the serial communication functionality.
This demo controls a motor. Arudino + Motor shield is used.
This demo read analog3 input from Arduino and control motor
with PID controller.

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

dennco - Linux - alpha 1.0

tkawata (tkawata) — Sat, 02 Jun 2012 00:54:00 GMT

ReleaseNote

dennco project

Alpha 1.0 release for linux
Date: June 1, 2012

- How to run:

1. Execute StartEngine.sh. It will launch the "dennco engine" application.
2. Press [Choose Dir] button and choose the directory contains the dennco
application content.
3. Press [Start] button. The application will be loaded into the engine and
start runnig.

- A sample containers are provided.
They are under Samples/Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample4_Arduino2_PIDControl
- demonstrate the serial communication functionality.
This demo controls a motor. Arudino + Motor shield is used.
This demo read analog3 input from Arduino and control motor
with PID controller.

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

dennco - Windows - alpha 1.0

tkawata (tkawata) — Sat, 02 Jun 2012 00:40:00 GMT

ReleaseNote

dennco project

Alpha 1.0 release for windows
Date: June 1, 2012

- How to run:

1. Execute StartEngine.bat. It will launch the "dennco engine" application.
2. Press [Choose Dir] button and choose the directory contains the dennco
application content.
3. Press [Start] button. The application will be loaded into the engine and
start running.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:

Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

Sample4_Arduino2_PIDControl
- demonstrate the serial communicattion functionality.
This demo controls a motor. Arudino + Motor shield is used.
This demo read analog3 input from Arduino and control motor
with PID controller.

Sample5_SimplePerceptron
- A example to implement Perceptron neural network using dennco.
To implement the logic. Following URL is referenced.
http://en.wikipedia.org/wiki/Perceptron

dennco - Mac OSX - pre alpha 1.2.1

tkawata (tkawata) — Wed, 02 May 2012 15:01:00 GMT

ReleaseNote

dennco project

pre-alpha 1.2.1 release for windows
Date: May 3, 2012

How to run:

- Execute QtDennco.app. It will launch the "dennco engine" application.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

pre-alpha 1.2.1 release - What changed:

1. The Arduino sketch included in Sample3_Arduino1 was wrong. Fixed it.

ChangeLog

1. The Arduino sketch included in Sample3_Arduino1 was wrong. Fixed it.

dennco - Windows - pre alpha 1.2.1

tkawata (tkawata) — Wed, 02 May 2012 14:30:00 GMT

ReleaseNote

dennco project

pre-alpha 1.2.1 release for windows
Date: May 3, 2012

How to run:

- Execute StartEngine.bat. It will launch the "dennco engine" application.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

pre-alpha 1.2.1 release - What changed:

1. The Arduino sketch included in Sample3_Arduino1 was wrong. Fixed it.

ChangeLog

pre-alpha 1.2.1 release - What changed:

1. The Arduino sketch included in Sample3_Arduino1 was wrong. Fixed it.

dennco - Linux - pre alpha 1.2

tkawata (tkawata) — Mon, 30 Apr 2012 12:19:00 GMT

ReleaseNote

dennco project

pre-alpha 1.2 release for windows
Date: Apr 30, 2012

How to run:

- Execute StartEngine.sh. It will launch the "dennco engine" application.

- A sample container is provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

pre-alpha 1.2 release - What changed:

1. Persistent storage functionality is added.
2. Serial communication functionality is added.
3. Sample containers are added. They are under Samples/Samples

ChangeLog

1. Persistent storage functionality is added.
2. Serial communication functionality is added.
3. Sample containers are added. They are under Samples/Samples

dennco - Windows - pre alpha 1.2

tkawata (tkawata) — Mon, 30 Apr 2012 12:06:00 GMT

ReleaseNote

dennco project

pre-alpha 1.2 release for windows
Date: Apr 30, 2012

How to run:

- Execute StartEngine.bat. It will launch the "dennco engine" application.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

pre-alpha 1.2 release - What changed:

1. Persistent storage functionality is added.
2. Serial communication functionality is added.
3. Sample containers are added. They are under Samples\Samples

ChangeLog

1. Persistent storage functionality is added.
2. Serial communication functionality is added.
3. Sample containers are added. They are under Samples\Samples

dennco - Mac OSX - pre alpha 1.2

tkawata (tkawata) — Mon, 30 Apr 2012 12:01:00 GMT

ReleaseNote

dennco project

pre-alpha 1.2 release for windows
Date: Apr 30, 2012

How to run:

- Execute QtDennco.app. It will launch the "dennco engine" application.

- A sample containers are provided.
They are under Samples\Samples. Following samples are provided:
Sample1_SampleCells
- demonstrate the functionalities of the cells.

Sample2_SimpleStorageCells
- demonstrate the persistent storage functionality.

Sample3_Arduino1
- demonstrate the serial communication functionality.
Arduino uno is expected to be used as the device communicate to.
A sketch for arduino is provided under Arduino/sketch1

On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

pre-alpha 1.2 release - What changed:

1. Persistent storage functionality is added.
2. Serial communication functionality is added.
3. Sample containers are added. They are under Samples\Samples

ChangeLog

1. Persistent storage functionality is added.
2. Serial communication functionality is added.
3. Sample containers are added. They are under Samples\Samples

dennco - Mac OSX - pre alpha 1.1

tkawata (tkawata) — Mon, 19 Mar 2012 14:48:00 GMT

ReleaseNote

dennco project

pre-alpha 1.1 release for Mac OSX
Date: March 19, 2012

How to run:

- Execute QtDennco.app. It will launch the "dennco engine" application.

- A sample container is provided.
It's under Samples\Samples\Sample1_SimpleCells
On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

dennco - Linux - pre alpha 1.1

tkawata (tkawata) — Sun, 18 Mar 2012 14:25:00 GMT

ReleaseNote

dennco project

pre-alpha 1.1 release
Date: March 18, 2012

How to run:

- Execute StartEngine.sh. It will launch the "dennco engine" application.

- A sample container is provided.
It's under Samples/Samples/Sample1_SimpleCells
On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.

dennco - Windows - pre alpha 1.1

tkawata (tkawata) — Sun, 18 Mar 2012 09:53:00 GMT

ReleaseNote

dennco project

pre-alpha 1.1 release
Date: March 18, 2012

How to run:

-Execute StartEngine.bat. It will launch the "dennco engine" application.

-A sample container is provided.
It's under Samples\Samples\Sample1_SimpleCells
On dennco engine application, press [Choose Dir] button and choose the
directory.
Press [Start] button will load the sample and execute.